How To Add Shower Head To Tub?

To add a shower head to a tub, follow these steps: Attach a diverter valve to the tub faucet, connect the shower head hose to the diverter valve, and secure the shower head to the wall or shower arm bracket.

How To Add Shower Head To Tub?

Tools Needed

• Basic plumbing tools can help you easily add a shower head to your tub.

• Make sure you have the following tools handy:

  • Wrench
  • Pliers
  • Teflon tape
  • Screwdriver
  • Adjustable wrench

• The shower head kit is another essential item you’ll need. It typically includes the shower head, an arm, and a flange.

• Plumbers tape is necessary to create a tight seal between the shower arm and the shower head.

• Before beginning the installation process, gather all the tools and materials to ensure a smooth and hassle-free experience.

• With the right tools and equipment in hand, you’ll be able to easily and efficiently add a shower head to your tub.

How To Add Shower Head To Tub? (Step By Step)

Step 1: Assessing The Tub

Before proceeding with adding a showerhead to your tub, it is important to assess the tub and its current configuration. This will help you determine the necessary steps and compatibility.

Checking The Existing Faucet

Begin by inspecting the existing faucet on your tub. Take note of its design and type, as this will play a crucial role in selecting the appropriate shower head attachment.

Determining The Compatibility Of The Tub

Next, evaluate the compatibility of the tub for adding a shower head. Consider factors such as the depth of the tub, the availability of a diverter valve, and the material of the tub. Some tubs may require additional modifications to accommodate a shower head.

Step 2: Removing The Existing Faucet

To add a shower head to your tub, you need to start by removing the existing faucet. The first step in this process is shutting off the water supply. You can do this by locating the shut-off valves under the sink or behind the shower wall. Turn them clockwise to close them and stop the flow of water.

Once the water supply is shut off, you can proceed to detach the shower arm. This is the pipe that connects the shower head to the wall. Use an adjustable wrench to loosen the connections and remove the shower arm.

With the shower arm removed, you can now focus on removing the old faucet. This may require the use of a basin wrench or other plumbing tools. Carefully disconnect the water hoses and any remaining connections to fully remove the old faucet.

Step 3: Preparing The Tub

Step 3 of adding a shower head to a tub is preparing the tub for installation. This involves cleaning the area and applying the plumber’s tape.

Before installing the new shower head, it is important to thoroughly clean the area where the shower head will be attached. Use a mild cleanser to remove any dirt, grime, or residue. Ensure that the surface is dry and free from any debris before proceeding.

Step Actions
1 Clean the area
2 Apply plumber’s tape

Next, apply the plumber’s tape to the threads of the shower arm. Start at the base and wrap the tape clockwise around the threads several times. This will help create a tight seal and prevent any leaks once the shower head is installed. Make sure to cover the entire threading with the tape.

By following these steps, you can effectively prepare the tub for adding a new shower head and ensure a secure and leak-free installation.

Step 4: Installing The New Shower Head

In step 4 of the process to add a shower head to your tub, you will need to assemble the new shower head kit. Start by unpacking the kit and making sure you have all the necessary components. There should be a shower arm, a flange, and the shower head itself.

Next, attach the shower arm to the water outlet on the wall. Use plumbing tape to ensure a secure and watertight connection. Once the shower arm is in place, you can attach the flange over the base of the shower arm. This will provide a finished look and help secure the shower head.

Finally, connect the new shower head to the shower arm. Most shower heads simply screw onto the arm, but be sure to tighten it securely. Once everything is in place, turn on the water to test for any leaks. Adjust the shower head as needed to achieve the desired water flow and angle. You are now ready to enjoy your new shower head in your tub!

Step 5: Testing And Finishing

After successfully completing the previous steps of installing a shower head to your tub, it’s time to move on to the testing and finishing part. Turning on the water supply is the first step you need to take.

Simply turn the water supply valve to start the flow of water. This will allow you to check if the installation was successful and if the shower head is working properly.

Next, it’s important to check for leaks. Carefully inspect all the connections and joints to ensure there are no water leaks. If you notice any leaks, tighten the connections as necessary to stop the water from seeping out.

Once you have confirmed that there are no leaks, you can proceed to adjust the shower head. Test the water flow and pressure, and make any necessary adjustments to achieve your desired shower experience. This may involve adjusting the angle or height of the shower head.

Lastly, give the shower head and the surrounding area a final wipe to remove any fingerprints or smudges. This will help give your newly installed shower head a polished look.

Tips And Considerations

Tips and Considerations

Choosing the right shower head is crucial when adding a shower head to your tub. Consider factors such as water pressure, spray pattern options, and material durability. Look for shower heads that have adjustable features to enhance your bathing experience.

Properly sealing connections is essential to prevent leaks and ensure a secure installation. Use the plumber’s tape to create a tight seal and avoid loose connections. Make sure to tighten the connections firmly, but be careful not to overtighten and damage the fittings.

It is important to take safety precautions during the installation process. Turn off the water supply before starting and use a wrench or pliers to disconnect the existing shower head. Use caution when handling tools and be mindful of any electrical components in the vicinity.

Frequently Asked Questions 

How Do You Add A Shower Head To A Tub?

Adding a shower head to a tub is a fairly simple process. First, remove the existing faucet spout by unscrewing it counterclockwise. Then, attach a diverter valve to the water outlet. Finally, attach the shower head hose to the diverter valve.

Now you can enjoy the benefits of a shower in your tub!

Can You Add A Shower Head To A Tub Without A Faucet?

Yes, you can add a shower head to a tub without a faucet. You will need to install a diverter valve, which diverts the water from the tub’s faucet to the shower head. This allows you to have the option of using both the faucet and the shower head.

What Tools Do I Need To Add A Shower Head To A Tub?

To add a shower head to a tub, you will need a few tools. These include an adjustable wrench, pliers, Teflon tape, and a diverter valve. Make sure to have these tools on hand before you begin the installation process to make it go smoothly.

Conclusion

Installing a shower head to your tub can greatly enhance your bathing experience. By following the simple steps outlined in this guide, you can easily add a shower head to your tub without the need for professional help. From gathering the necessary tools to connecting the plumbing, this process can be completed in no time.

So why wait? Upgrade your tub and transform your daily routines with a refreshing shower. Start enjoying the convenience and luxury today!

Leave a Comment